In order to pay attention to the quality of aluminum alloy doors and windows, we also need more cleaning and maintenance. Only the door and window products can be used for a long time, and it is not so easy to have aging problems. Compared with aluminum alloy doors and windows, the operation will face wind and rain. If it is not regularly maintained, long-term accumulation, aluminum alloy doors and windows will accumulate a lot of dust and stains. So how do you clean and maintain aluminum alloy doors and windows?
First, vinegar water scrubbing is simply clean
Whether it is the bedroom door and window, the bathroom glass door is still the kitchen sliding door, the glass is everywhere in the aluminum alloy doors and windows. Aluminum alloy door and window glass can be cleaned with a rag padded with vinegar water; if the window is stained with oil, first spray the glass on the cleaning agent, then put on the plastic wrap to soften the condensed oil stains. After ten minutes, tear off the fresh-keeping. The film can be scrubbed with a damp cloth.
Second, timely repair and replacement
Through more than a decade, most of the windows in many urban homes now use aluminum alloy doors and windows. The appearance is lubricated, the appearance is bright, and the cleaning is the characteristic of aluminum alloy doors and windows. Aluminum alloy doors and windows can be cleaned with a soft cloth dampened with water or a neutral scrubbing agent. Do not use ordinary pancakes and washing powder, or use strong acid-base cleaners such as decontamination powder and toilet cleaner. During the operation of aluminum alloy doors and windows, it should be lightly pushed and pulled, and the push and pull should be smooth; if it is found to be difficult, do not force it. Keep the door frame clean, especially the cleaning of the groove. Vacuum cleaner can be used to remove the ash from the inside of the tank and the door seal;
Third, the hardware can not be less clean
Aluminum alloy doors and windows are not only composed of window frames, but also window glass, hardware, and even gauze. Therefore, these parts are required to be clean and clean when cleaning windows. When the window of the gauze is cleaned, the gauze of the window must first be removed. Put the removed gauze in the bathtub or near the bathtub. New Hausen doors and windows are recommended to be gently washed with a soft water pipe or shower to remove the spider web, dust and other dirt stuck on it; secondly, some water in the bucket is used to wash some pansy with a short hair brush. Water, then gently brush on the gauze to ensure that the gauze is now covered with enough Panyu foam; finally, clean the pancakes with a soft water pipe or shower, then wait for the air to dry.
Fourth, the rational use of sponge
Because the softness of the sponge is very good, the sponge is cut into the width of the aluminum alloy door and window track, and it is easy to penetrate into the gap between the door and the window, and the residual dirt in the gap between the door and window can be cleaned easily.
Five, glass glue
When aluminum alloy doors and windows are used for a long time, there will be some gap opening. If these gaps are not treated, it will be easy to stain and affect the appearance. At this time, you can use glass glue. With it, even if you open the gap in any corner of your home, you can get timely treatment. It can also be waterproof and mildewproof. You don't need to ask the decoration worker to handle it. You can easily get it at home.
In general, a beautiful aluminum alloy door and window can change the tedious life, it can transmit the colorful world. The window is the main source of light in the room. If the aluminum alloy doors and windows are dirty, it may cause the light to not smoothly enter the room, and it is not possible to disinfect the room with sunlight. Therefore, we should pay attention to maintenance during daily use.